产品名称: WK1868A 高阻机/Megohmmeters
  • 产品参数
  • 适用范围
  • 说明
  • 产品描述
  • 参数配置
● High Output Power to 80Watts
● Measurement Range: 10kΩ to 1PΩ
● Basic Accuracy: ± 2% to 1TΩ
● Programmable Test Voltage: 10V to 1kV (1868A), 50V to 5kV (1868D)
● Selectable Charge Current: to 80mA (1868A), to 18mA (1868D)
● Leakage Current Measurement Down to 1pA (± 2% Basic Accuracy)
● Programmable Charge, Delay and Discharge Times
● Contact Check Function
● 5 Programmable Limit Sets
● Internal Storage of 4 Tests (20 Steps each) Plus Additional Storage with Optional PCMCIA Memory Card
● Standard RS232, IEEE and Remote I/O Interfaces
● Graphic LCD with Text, Bar Graph and X-Y Graph Displays
● Current or Resistance Display Mode
● 4 Ranges Plus Automatic Ranging
● Automatic Zeroing
● Floating Power Supply (1868A) for Measurements on Grounded Devices
Resistance Range
10k惟 - 1P惟 (dependent on test voltage) 4 Ranges or Auto Range:
Range 1: 1pA to 10nA, Range 2: 2nA to 100nA,
Range 3: 20nA to 10uA, Range 4: 2uA to 1mA
Resistance Accuracy
For Rx <20G (Vx): 卤(2% of reading +5cnt) ,
For Rx >20G (Vx): 卤(Vx/1pA) in ohms.
Max reading: Vx/0.1pA
Rx = Measured resistance in ohms, Vx = Programmed voltage in volts
Voltage Range
10 to 1000V DC in 1V steps, 1868A
50 to 5000V DC in 1V steps, 1868D
Voltage Accuracy 2% of setting, 卤1V in uncalibrated mode
Source Resistance 100惟, 1kV (1868A); 3.3k惟, 5kV (1868D)
Charge Current 2/25/80mA (1868A); 2/10/18mA (1868D)
Discharge Resistance 100k惟
Current Measure 1pA to 1mA
Current Accuracy 卤[2% of reading +5cnts +1pA]
Input Impedance For Ix > 10nA: 10k惟 ; For Ix < 10nA: 1M惟 ,Ix = Programmed current in amperes
Measure Limits 5 Programmable Limit Sets
Measurement Result Resistance or Current
Measurement Mode Continuous or Triggered
Averaging 1-100 measurements
Test Speed Trigger Mode: 40msec, Continuous Mode: 90-4000msec,
(Depending on # to Average)
Programmed Time
Charge: 0 - 9999msec
(Charge R: 200惟)
Measurement Delay: 0 - 9999msec
Discharge: 0 - 100sec or Auto mode
Auto: 0.1(Cx) as Vx goes to 1% Vt
Cx = Measured capacitance (渭F)
Vx = Programmed voltage (V)
Zero/Offset Automatic Zeroing of All Ranges or Individual Zeroing of 4 Ranges
Display
LCD graphic display
3.5 digit resolution
Line Graph: X-Y: I or R versus Time
Bar Graph: 8 ranges/2 decades/graph, Fixed or auto-scale
Indicators: HV, Measure, Bin, Remote
Standard Interfaces RS232, IEEE 488, Remote I/O
Internal Storage
2 Global Setups (Save Instrument Setup and Sequence Setups)
4 User-Programmable Sequence Setups, (Up to 20 Steps each)
4 Pre-Programmed Sequence Setups
External Storage
PCMCIA Interface for 2M SRAM Memory
Cards (20 Setups/20 Steps each)
Input Terminals
HV: BNC Connector
I IN: Triaxial Connector
GUARD: Sheathed Banana Plug
Safety
Interlock Plug
Password-protected Charge Current (For I > 2mA)
HV Break Red LED/Push Button
Dimensions (w x h x d):12.5 x 4.5 x 15.5 inches (312.5 x 112.5 x 387.5 mm)
Weight
28 lbs (12.7kg) net
41 lbs (18.6kg) ship
Environmental Operating: 10掳C to +40掳C, 80% RH
Power
110V - 240V
50 or 60Hz
400W Max (1.8A at 220V AC, 3.2A at 125V AC)

Case / 最新案例
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
Copyright (c) 2005 - 2013 北京稳科通达仪器仪表有限公司