产品名称: WK7920
  • 产品参数
  • 适用范围
  • 说明
  • 产品描述
  • 参数配置
With 200V~5000V programmable impulse voltage, it is capable of low-energy testing, without damaging the coil.
Provide high-speed sampling rate of 100MHz, which enhances the testing ability for partial discharges.
320 x 234 color LCD display clearly for the user to view waveform and test results.
Provide user-friendly operation interface.
Low inductance during impulse testing, minimum to 10uH.
Provide 4 kinds of detection modes: AreaSize Comparision, DiffZone Comparision, Corona Amount Comparision, and Corona Number Comparision.
The comparative result shows Pass/Fail directly, informing operators the detect test result within a short period of time.
Offer measurement functions for voltages, timing and frequencies, which provide user a carry-out analysis in detail.
Able to save 360 sets of standard waveform result of the coil for users to download and implement into testing.
Provide RS-232 to PC connection. Just using standard text command, you can writing control program and data for communication easily.
it's the best way to set up the testinf system for mass production.
To make analysis easier, 7920L/7920 offers USB2.0 interface to connect with PC for users to upload or download the parameters of waveforms results.
Provide the control function for external I/O, such as the Handler adopts standard D SUB 9-pin connector for connecting with automatic or semi-auto testing system.

 

7920L- 200nH 以上 /  7920- 20μH 以上
具有100MHz高速度的取樣速率,可儲存100組波形,提供電壓、時間和頻率的測量分析功能, USB、RS232、I/O傳輸界面是標準配置, 彩色化螢幕操作。
Case / 最新案例
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
2013 - 11 - 30
点击次数: 105
...


现在市场上测试的一些材料表面无法加工甚至不可能加工至非常光滑,两面也无法做到平行度非常好,这样用接触法测试这种材料的介电常数由于有空气间隙的将会存在非常大的误差,如果要求测试这种材料频率从20Hz~40MHz几乎不可能,测试样品举例如下面几幅图片。 用非接触法测试上述这些材料的介电常数,不进对材料的表面的粗糙度还有两个面的平行度的要求不是特别高,测试的准确度高。 理论上的可行性: 其中: Cg:没...
Copyright (c) 2005 - 2013 北京稳科通达仪器仪表有限公司